A hybrid homogeneously weighted moving average control chart for process monitoring: Discussion

The sensitivity of a monitoring scheme depends on many factors including the variance of the charting statistic which is very important in the computation of the control limits. This paper discusses the computation of the variance of the recently proposed hybrid homogeneously weighted moving average (HHWMA) $\overline{X}$ scheme which was based on an incorrect assumption. The correct variance is used to evaluate the run-length characteristics of the HHWMA $\overline{X}$ scheme. It is observed that the incorrect variance has a significant impact on the sensitivity (or performance) of the HHWMA $\overline{X}$ scheme.     

超高效液相色谱-飞行时间质谱法快速分析测定山药中7种常见杀菌剂

目的 建立超高效液相色谱-飞行时间质谱检测山药中7种常见杀菌剂的分析方法。方法 样品经乙腈提取，水浴氮吹至近干，丙酮定容，经超高效液相色谱-飞行时间质谱检测。结果 在正离子模式下，7种杀菌剂在水-甲醇（均含有0.01%甲酸和5 mmol/L甲酸铵）流动相中都具有较好的响应；0.01~0.40 mg/L范围内线性良好，相关系数R均大于0.999。不同温度（50℃、70℃）水浴实验结果表明70℃水浴温度符合实验要求。三个浓度水平的加标回收实验的回收率为70.75％～108.07％，相对标准偏差为 0.02％～5.01％。结论 该方法操作简单、分析准确，满足山药中常见杀菌剂的检测要求。     

Nucleation‐controlled dual semicrystalline morphology of polyamide 11

Crystallization of polyamide 11 at low supercooling of the melt proceeds via heterogeneous nucleation and spherulitic growth of lamellae, while at temperatures close to the glass transition homogeneous nucleation prevails, preventing spherulite formation and leading to formation of a large number of nanometer‐sized mesophase domains. It is shown that spherulitic and non‐spherulitic crystallization at low and high supercooling of the melt, respectively, can be enforced by tailoring the cooling conditions, causing a twofold semicrystalline morphology at ambient temperature. Analysis of non‐isothermal crystallization as a function of the cooling rate, using fast scanning chip calorimetry, reveals that in the case of polyamide 11 such twofold semicrystalline morphology is predicted when cooling at rates between about 20 and 200 K s^?1, since then two separate crystallization events are observed. The prediction has been confirmed by preparation of films crystallized during ballistic cooling at different rates which then were analyzed regarding their structure using optical microscopy, X‐ray diffraction and calorimetry. The study is completed by discussion of implications of twofold non‐isothermal crystallization for structure evolution in polymer processing, as well as by providing information that such behavior is not only typical for polyamide 11 but also for isotactic polypropylene or poly(butylene terephthalate) as two further examples. © 2018 Society of Chemical Industry     

Formation mechanism of porous reaction-bonded silicon nitride with interconnected pores in the presence of MgO

In porous reaction bonded silicon nitride, whiskers normally grow in globular clusters as the dominant morphology and deteriorate the pore interconnectivity. However, the ceramic microstructure was significantly transformed with the addition of MgO; specifically, the morphology was modified to a combination of matte and hexagonal grains. Microstructural observation along with thermodynamic studies suggest that MgO interfered with the presence and nitridation of SiO_(g). Consequently, rather than being involved in the whiskers’ formation, surface silica instead reacted with volatile MgO to form intermediate products. Through these reactions, whisker formation was blocked, and a porous interconnected structure formed which was confirmed by 3D tomography. After heat-treatment at 1700 °C, β-Si₃N₄ crystallized in a glassy matrix containing magnesium. Resulting samples had an open-pore structure with porosity of 74–84 vol. %, and density of 0.48-0.75 g.cm^?3. Combination of high porosity and pore size of <40 μm led to compressive strengths of 1.1–1.6 MPa.     

海藻多酚功能性作用机制及其应用初探

海藻多酚是海藻次级代谢产物,具有多种生物学活性,能够为人体所吸收和利用,所以海藻多酚成为了现阶段海洋活性物质研究的一个重点。就海藻多酚功能性作用机制以及其应用做分析,旨在为实践提供指导和帮助。     

西汉徐地鲁恭王宫苑园林——鲁灵光殿研究

汉代是中国园林的形成阶段,不仅园林建筑物有所增加,成为住宅的延伸与扩展,而且人工造景比重也增大,造园要素趋于完备。园林的内容与功能随着社会生活的改变而逐步多样和完善,不仅是射猎、走狗、跑马的场所,还可以是游船、宴乐、赏鱼虫走兽、观看百戏的地方。造园在布局上也采用灵活多变的手法,按功能的需要,穿插安置不同形式的厅堂、楼阁、亭榭等。通过对鲁灵光殿时代背景及汉代园林、建筑营造形式的深入研究,结合文献的相关记述,梳理出鲁灵光殿的沿革,并以此为依据,对鲁灵光殿进行复原。     

Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.     

Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.